Products  Process and quality monitored threading

Tauro 8   M0,5 - M4

0,030 – 0,800 Nm
M0,5 – M4 AlMg4,5Mn / 3.3547 (aluminum)
M05 – M3 X6CrNiMoTi17-12-2 / 1.4571 (stainless steel)
50 – 3000 rpm

Tauro 25   M1 - M6

0,10 – 2,50 Nm
M1 – M6 AlMg4,5Mn / 3.3547 (aluminum)
M1 – M5 X6CrNiMoTi17-12-2 / 1.4571 (stainless steel)
50 – 3000 rpm

Tauro 83   M2 - M12

0,3 – 8,30 Nm
M2 – M10 AlMg4,5Mn / 3.3547 (aluminum)
M2 – M8 X6CrNiMoTi17-12-2 / 1.4571 (stainless steel)
50 – 2400 rpm

Tauro 120   M2 - M12

0,3 – 12 Nm
M2 – M12 AlMg4,5Mn / 3.3547 (aluminum)
M2 – M10 X6CrNiMoTi17-12-2 / 1.4571 (stainless steel)
50 – 2400 rpm

Taurox 300   M4 - M18

1,4 – 30 Nm
M4 – M18 AlMg4,5Mn / 3.3547 (aluminum)
M4 – M16 X6CrNiMoTi17-12-2 / 1.4571 (stainless steel)
50 – 800 rpm

Taurox 400   M5 - M18

2 – 40 Nm
M5 – M18 AlMg4,5Mn / 3.3547 (aluminum)
M5 – M16 X6CrNiMoTi17-12-2 / 1.4571 (stainless steel)
25 – 600 rpm

Taurox 900   M6 - M22

8 – 90 Nm
M6 – M22 AlMg4,5Mn / 3.3547 (aluminum)
M6 – M18 X6CrNiMoTi17-12-2 / 1.4571 (stainless steel)
25 – 250 rpm

TauroTribometer   Tribometrisches Prüfsystem

The Tauro Tribometer is a test system for evaluation of friction and wear at cutting and forming thread tapping. The test system is designed for optimization of cooling lubricants, lube oils, fine tuning lubricant additives and improvement of tool geometry and coating. With a high precision XY coordinate table, test bores are positioned automatically and accurate.

Accessories

• Collet chuck ER11 (Tauro 8)
• Quick change inserts Size 0 (Tauro 25)
• Quick change inserts Size 1 (Tauro 83 / 120 / Taurox 300)
• Quick change inserts Size 2 (Taurox 400 / 900)
• Spindle feed system with foot switch (pneumatic 87psi / 6bar)
• Minimum lubricant unit lubricant pulse (pneumatic 87psi / 6bar)
• Minimum lubricant unit lubricant pulse, air pulse, air cleaning pulse (pneumatic. 87psi / 6bar)
• Signal strip green, yellow, red for quality evaluation
• Signal light column green, orange, red and horn for quality evaluation
• Key switch with lock-out
• Additional push buttons selection for parameter data base
• Fixation to wall assembly kit for fixation to wall (control unit Tauro 8 / 25 / 83)